MP-HD-W11

MP-HD-WL11 is a wireless HDMI extension solution kit, it transmits full HD video up to 130m with low latency of 60~100ms as well as low power consumption. It can be used at home theater, conference center, auditorium etc.

  • Video resolution up to 1920x1080.
  • Supports 44.1/48 KHz, 16/24 bit audio signal transmission.
  • The transmission distance is up to 426ft/130m.
  • HDCP compliant.
  • Wide bandwidth: 12~25Mbps at 720P, 15~36Mbps at 1080P.
  • Allows multiple point to point transmission established in the same area.
  • Channel spectrum width: 20/40MHz.
  • No more than 3W power consumption for Tx or Rx.

Powered by Froala Editor

Transmitter
Video Input(1) HDMI
Video Input Connector(1) Type-A female HDMI
Power Input(1) DCJACK, (1) DC5V
Power Input Connector(1) DC Jack, (1) Micro-USB
Receiver
Video Output(1) HDMI
Video Output Connector(1) Type-A female HDMI
Power Input(1) DCJACK, (1) DC5V
Power Input Connector(1) DC Jack, (1) Micro-USB
General
Video StandardH.264
Resolution SupportAll, 640x480~1920x1080
Interline CCD MethodProgressive Scanning
HDCPAvailable
Factory ResetAvailable
Audio Support44.1KHz, 48KHZ, 16/24bit
Ethernet1:1, unicast
BandwidthStill: 6~8Mbps
Video: 12~25Mbps at 720P, 15~36Mbps at 1080P
Ethernet Speed10/100 (IEEE 802.11n)
Latency720P, 1080P: 60~100ms
NetworkLAN
User ConfigurationThrough Web-GUI, possible change IP
H/W Specification802.11n, 5GHz, 2T2R
Booting Time38~40s
Speed of Change
Resolution
8s
Transmission Distanceup to 426ft/130m at 1080P
External Power Supply100V~240V AC, 50/60Hz or 5VDC 1A
Power ConsumptionTx: 5V 580mA=2.9W
Rx: 5V 540mA=2.7W
Product TemperatureRx: 37℃, Tx:49℃
Operation Temperature-10℃ ~ +55℃
Storage Temperature-25℃ ~ +70℃
Relative Humidity10% ~ 90%
Dimension (W*H*D)87.0mm(W) x 24.5mm(H) x 64.0mm(D)
Net WeightTx/Rx: 225g

 

Powered by Froala Editor